← Sources · Canada digest

Memorandum of Understanding on Interprovincial Trucking — Minimum National Standards

Minimum national standards (March 2026)guidanceCanada federalstatus: partialaccessed 2026-11-16

Not legal advice. Always verify with the issuing authority and the permit text before moving. Editorial copy for reference — not a substitute for the official publication.

Partial copy. Some sections are present. Gaps are marked and are not law. Never invent missing text. English PDF. Text that extracted is copied. The D-sign section-width diagram did not extract as numbers and is not redrawn. Section 7 has a heading and no text body. No French PDF was found.

Official publication · Council of Ministers Responsible for Transportation and Highway Safety, Task Force on Vehicle Weights and Dimensions Policy

Memorandum of Understanding on Interprovincial Trucking

Minimum National Standards

March 2026. Task Force on Vehicle Weights and Dimensions Policy.

  1. Signage, Lighting and Flags for Oversized Vehicles
  2. Escort Vehicles
  3. Applications for Oversize and/or Overweight Permits — Data Elements
  4. Definition of day and night (for OS/OW permits)
  5. Construction Zone Clearances
  6. Oversized and Overweight Vehicles — Processes to Obtain Special Permits
  7. Applications for Oversize and/or Overweight Permits — Common Data Elements

1. Signage, Lighting and Flags for Oversized Vehicles

D-sign

The PDF labels a "Section Widths (cm)" diagram for the overdimensional vehicle and for the escort D-sign. Those width numbers did not extract as text. They are not restated here.

Lighting

360° amber warning light:

Solid amber light:

Solid red light:

Notes in the PDF:

  1. All 360° warning lamp(s) shall conform to SAE J845 or SAE J1318 of class 1 or 2 standard.
  2. Solid amber lamp(s) shall conform to SAE Code P2 or P3 with markings to appear on lamp(s).

Flags

2. Escort Vehicles: Vehicle Specification, Signage and Lighting

Vehicle: Must be large enough and have sufficient load carrying capacity to carry the required equipment and signage and lighting. Number of axles: maximum 2. Wheelbase: minimum 2.65 m.

Communications: The escort vehicle(s) and towing vehicle(s) shall be equipped with a means to support continuous direct communication between the vehicles.

Safety equipment and warning signals:

Option 1

D-sign: mounted on a rigid surface and clearly visible for a distance of at least 150 metres from the front and rear of the escort vehicle. White level II reflectance and stop sign red. The sign shall be removed or covered when not in use.

Lighting: two amber inboard rotating or flashing amber lights that are at least 200 mm in diameter and visible on a 360-degree basis from the vehicle (SAE J845 or J1318 Class 1 or 2).

Option 2: lighted sign box with integrated D-sign

The box has two positions: upright when in use and folded flat on the carrier when not in use. It must be 180 cm by 35 cm, self-illuminated so the sign is visible from 300 metres under clear conditions at night, and shelter its wiring. The sign must be at least 3 mm thick with a white plexiglass background with red bars painted with transparent red paint. The letter "D" must be white and 20 cm high, Series E. Outboard lights: two 175 mm flashing amber lights (SAE J595). Inboard lights: two amber lights at least 200 mm in diameter, visible on a 360-degree basis (SAE J845 or J1318 Class 1 or 2).

3. Escort vehicle — driver qualifications

Must be operated by a person at least 18 years of age with at least two years' experience and in possession of a full (unrestricted) driver's license.

The PDF's contents list calls item 3 "Applications for Oversize and/or Overweight Permits — Data Elements" and then uses item 3 again for driver qualifications. Both labels are printed. The driver paragraph is what sits under the second "3" in the body.

4. Definition of daylight and nighttime (for OS/OW permits)

For the purposes of movement of oversize and/or overweight loads which are subject to time-of-day restrictions:

Sunset and sunrise times will be those established by the National Research Council of Canada for the location of the vehicle.

5. Construction zone clearances

Lanes on freeways or with regular truck traffic in constructions zones are required to maintain a minimum width of 3.5 m as per the national guidelines for road work-zone safety defined by the Transportation Association of Canada. Maintaining this minimum lane width may not possible in situations where there are physical barriers or due to safety concerns based on existing infrastructure, geography or other factors.

The sentence "may not possible" is printed that way in the PDF.

6. Oversized and overweight vehicles — processes to obtain special permits

To support the safe and efficient operation of oversized and overweight vehicles across provincial/territorial boundaries each province and territory will develop and publish permit service standards by March 31, 2026.

PLACEHOLDER — still needed: Section 7, "Applications for Oversize and/or Overweight Permits — Common Data Elements," is a heading on the last page. No body text extracted. Do not invent the data elements. The D-sign section-width diagram is not redrawn.

Source