Heavy Truck Weight and Dimension Limits for Interprovincial Operations in Canada
Not legal advice. Always verify with the issuing authority and the permit text before moving. Editorial copy for reference — not a substitute for the official publication.
Partial copy. Some sections are present. Gaps are marked and are not law. Never invent missing text. English PDF, 44 pages, file creation date 27 October 2025 UTC. General conditions, Category 1 dimension and weight limits, the Category 1A steering-axle line, and Amendment 12 are copied. Vehicle diagrams are not redrawn. Categories 1A through 8 except that steering line, specialized vehicles, exceptions, interpretations, designated highway systems, the rest of the amendment history, and definitions are not copied. No French PDF was found.
Official publication · Council of Ministers Responsible for Transportation and Highway Safety, Task Force on Vehicle Weights and Dimensions Policy
Heavy Truck Weight and Dimension Limits for Interprovincial Operations in Canada
Resulting from the Federal-Provincial-Territorial Memorandum of Understanding on Interprovincial Weights and Dimensions. Summary Information. October 2025.
The Federal-Provincial-Territorial Memorandum of Understanding on Interprovincial Weights and Dimensions
The Provincial and Territorial governments in Canada have authority over the weight and dimension limits which apply to the highways within their boundaries. The Memorandum of Understanding on Interprovincial Weights and Dimensions (MOU) is intended to provide improved uniformity in weight and dimension limits through establishment of minimum and/or maximum thresholds acceptable to all jurisdictions for configurations of vehicles commonly used in interprovincial transportation.
Implications
Under the terms of the Memorandum of Understanding, each of the provinces and territories will permit vehicles which comply with the appropriate weights and dimensions described in the following section to travel on a designated system of highways in their jurisdiction.
It should be recognized that each jurisdiction continues to retain authority to allow more liberal weights and dimensions, or different types of vehicle configurations, for trucking operations within their jurisdiction. In addition, for trucking operations which take place between adjacent jurisdictions with compatible weight and dimension regulations which are more liberal than those specified in this document, the local regulations will prevail.
For further information on the Memorandum of Understanding, please contact the appropriate authority in each participating jurisdiction.
General Conditions
A vehicle meets the requirements of this Memorandum when all of the following conditions are met:
- It has all of the characteristics provided for below for the following eight categories:
- Category 1: Tractor Semitrailer
- Category 1A: Tridem Drive Tractor Semitrailer
- Category 2: A Train Double
- Category 3: B Train Double
- Category 4: C Train Double
- Category 5: Straight Truck
- Category 6: Truck - Pony Trailer
- Category 7: Truck - Full Trailer
- Category 8: Intercity Bus and Recreational Vehicles
- Its height, including load, does not exceed 4.15 metres
- Its width, including load but excluding mirrors, lamps, and load covering or securing devices, does not exceed 2.6 metres
- Its length, including load, does not exceed:
- Category 1: Tractor Semitrailer — 23 metres
- Category 1A: Tridem Drive Tractor Semitrailer — 23.5 metres
- Category 2: A Train Double — 25 metres
- Category 3: B Train Double — 27.5 metres
- Category 4: C Train Double — 25 metres
- Category 5: Straight Truck — 12.5 metres
- Category 6: Truck - Pony Trailer — 23 metres
- Category 7: Truck - Full Trailer — 23 metres
- Category 8: Intercity Bus and Recreational Vehicles — 14 metres
- Its Gross Combination Weight does not exceed:
- Category 1: Tractor Semitrailer — 47 000 kg
- Category 1A: Tridem Drive Tractor Semitrailer — 52 300 kg
- Category 2: A Train Double — 53 500 kg
- Category 3: B Train Double — 62 500 kg
- Category 4: C Train Double — 58 500 kg
- Category 5: Straight Truck — 24 250 kg
- Category 6: Truck - Pony Trailer — 45 250 kg
- Category 7: Truck - Full Trailer — 53 500 kg
- Category 8: Intercity Bus and Recreational Vehicles — 24 250 kg
- Its axle weight does not exceed the weight limit stipulated for each axle type in its vehicle category, it being understood that the load shared between adjacent axles in a group must not vary by any more than 1000 kg.
- Its axle weight does not exceed the lesser of the maximum rated capacity of any single component of the axle, suspension or braking system, the rated capacity of the tires, or 10 kg/mm of tire width (with a minimum tire width of 150 mm).
- Each semitrailer has only one axle group consisting of either a single axle or a tandem or tridem group that will achieve equalized load sharing between axles in the group. This does not necessarily preclude the use of independently suspended axles or axle groups in the tandem or tridem categories, provided load equalization can be demonstrated.
- Its axle weights and Gross Vehicle Weight do not exceed the limits stipulated for each axle and vehicle type, recognizing that jurisdictions will not have legislated or published tolerances concerning the enforcement of the local legislation.
- Its axle weights, when an axle in a single, tandem or tridem axle group is fitted with either two sets of dual tires, or two single tires each of which has a width of 445 mm or greater, do not exceed the weight limit stipulated for each axle type in its vehicle category.
Additional Conditions and Restrictions
The weight limits of several jurisdictions are also subject to seasonal restrictions, primarily during the spring thaw period. As the timing and nature of these restrictions vary by province, carriers should contact provincial authorities directly for specific details.
The use of liftable axles is discouraged or prohibited in a number of jurisdictions, primarily in western Canada.
The province of British Columbia requires that highway tractors use engines which meet a minimum ratio of gross weight to horsepower of 150 kg/hp. In addition, vehicle combinations with gross weights in excess of 38,000 kg must employ tractors with tandem or tridem drive axles.
Category 1: Tractor Semitrailer — Part 1, Dimension Limits
| Dimension | Limit |
|---|---|
| Overall Length | Maximum 23 m |
| Overall Width | Maximum 2.6 m |
| Overall Height | Maximum 4.15 m |
| Tractor wheelbase | Maximum 6.2 m |
| Tractor tandem axle spread | Minimum 1.2 m / Maximum 1.85 m |
| Semitrailer length | Maximum 16.2 m |
| Semitrailer wheelbase | Minimum 6.25 m / Maximum 12.5 m |
| Kingpin setback | Maximum 2.0 m radius |
| Effective rear overhang | Maximum 35% of wheelbase |
| Tandem axle group spread | Minimum 1.2 m / Maximum 1.85 m |
| Tridem axle group spread | Minimum 2.4 m / Maximum 3.7 m |
| Track width, dual tires | Minimum 2.5 m / Maximum 2.6 m |
| Track width, single tires | Minimum 2.45 m / Maximum 2.6 m |
| Single axle to single, tandem, or tridem axle group | Minimum 3.0 m |
| Tandem axle group to tandem axle group | Minimum 5.0 m |
| Tandem axle group to tridem axle group | Minimum 5.5 m |
The summary's notes on this table: the tractor wheelbase can exceed 6.2 m provided the requirements of Amendment 9 are respected. The minimum track width for trailers fitted with single tires and manufactured prior to 2010 is 2.3 m.
The dimension diagram on the PDF page is not redrawn here.
Category 1: Tractor Semitrailer — Part 2, Weight Limits
| Weight | Limit |
|---|---|
| Steering axle | Maximum 6000 kg |
| Single axle | Maximum 9100 kg |
| Tandem axle group, spread 1.2 m to 1.85 m | Maximum 17 000 kg |
| Tridem axle group, spread 2.4 m to less than 3.0 m | Maximum 21 000 kg |
| Tridem axle group, spread 3.0 m to less than 3.6 m | Maximum 23 000 kg |
| Tridem axle group, spread 3.6 m to 3.7 m | Maximum 24 000 kg |
| Gross vehicle weight, three axles | Maximum 24 200 kg |
| Gross vehicle weight, four axles | Maximum 32 100 kg |
| Gross vehicle weight, five axles | Maximum 40 000 kg |
| Gross vehicle weight, six axles, tridem spread 2.4 m to less than 3.0 m | Maximum 44 000 kg |
| Gross vehicle weight, six axles, tridem spread 3.0 m to less than 3.6 m | Maximum 46 000 kg |
| Gross vehicle weight, six axles, tridem spread 3.6 m to 3.7 m | Maximum 47 000 kg |
Category 1A steering axle
The Category 1A weight table prints: Steering Axle — Maximum 7300 kg. Note 4: Jurisdictions can require that the steering axle weight be at least 27% of the weight carried by the tractor drive tridem axle group.
PLACEHOLDER — still needed: The rest of Category 1A, Categories 2 through 8, specialized vehicles S1 and S2, Exceptions, Interpretations and Clarifications, Designated Highway Systems, Amendments 1 through 11 in full, and Definitions. Do not invent. The PDF diagrams are not redrawn.
Amendment 12
In October 2025 amendments were made as follows:
- Tractor Steering Axle Weight Limit. Increased from 5500 kg to 6000 kg.
- Category 1: Tractor-Semitrailer. Elimination of a weight allowance (introduced in 2011) for tractors equipped with auxiliary power units (APU's).
- Category S1: Stinger Steer Automobile or Boat Carrier. Amendments to the dimension limits to improve compatibility with regulations in the United States.
Source
- Official URL: https://comt.ca/english/programs/trucking/MOU%20Summary%202025.pdf
- Accessed: 2026-11-16
- Publisher: Council of Ministers Responsible for Transportation and Highway Safety
- English publication. A French edition was not found.